Klantbeoordelingen voor VEVOR Draaibank 550W Metaaldraaibank 7x12inch Precisie Mini Metaaldraaibank 2500RPM

Works great! Definitely worth the money

Overall good product, had one minor issue when the item arrived, the magnet for the RPM sensor was missing, I contacted customer support and they took care of the issue by sending me not one replacement magnet, but grisly sent me 5. I would recommend this induct.

This is a very capable machine for the price. You will need to have some basic mechanical aptitude to set it up correctly and fine tune the machine as it is workable right out of the box but not great. After 3-4 hours of re-assembly, sanding down burrs, flattening certain slides with a stone, this machine is excellent. It machined a grade 5 bolt steel without issue. Very impressed

This thing is great for the price. You can turn aluminum brass and derlin right off the bat. And with a few of the mods showcased on youtube you can cut basically anything to a decent enough standard. This is not a precision machine, but for the price. No reasonable person would expect it to be. Great bargain

I'll be writing this review from the perspective as a new lathe user, and a hobbyist. Mileage may vary for more professional users. I want to work both wood and metal; i have limited (very limited) space, and won't be working on larger things. The largest pieces would be 2.5"x2.5"x12" wood spindles to cut them to cylindrical; and metal pieces much smaller. I was impressed by the packaging; it was sturdy and well packed in a wood crate. Even though the courier delivered it on it's end, despite a very clear "THIS WAY UP" printed on the front, the lathe was bolted to the wooden base and didn't move a millmeter and all was well. As with any machine on the cheaper side of the market, it needed an initial cleanup, but surprisingly little compared to other tools i've bought. took apart the cross slide, wiped and brushed down all the parts, greased the screw shaft and gear teeth, oiled the surfaces, and it was ready to go! Within expectations for this cost, the surfaces were pretty good. For some there's pitting/scratches, but not enough to get in the way. the headstock seems to run true and without vibration; the chuck was quite a bit beefier than i expected, and the jaws move well and firmly grasp, no noticeable slack. The tail stock appears to clamp itself into the center very well. The cross slide has a little takeup when changing direction, but this being a manual lathe, not too concerned about backlash/slop. Can move in all directions with good accuracy. Built a wood tool rest to clamp onto the cross slide, and then tried using hand tools, worked great for wood too. Tested some mild steel, and aluminum, also great cuts first try. Well as great as a noob would expect. All in all, great tool for the price, as long as you have your expectations in the right place. Very happy with purchase. Will update if time proves different.

This little lath works as advertised. Only issue is the plastic drive gears seem a little weak and tool post is very basic.

It is a much better quality than I expected The Center lock on the tail stock was missing a clip that hold the lock mechanism in place. I still need to find out how to adjust the saddle. It is tight at the chuck but loose at the tail stock.

EXCELLENT! 109 lb wood crate arrived from VEVOR, Delta, BC to Toronto w Free Shipping via Fedex Ground in 5 Days! (Shipped day after order so 6 Days A Wed. to next Tue.). INCREDIBLE! No cost above checkout price. Estimate was 10 to 16 bus. days. Minor crate damage: 1 of 4 square 4" wooden bottom blocks knocked off, 2 pcs of side stripping broke off Lathe condition: Working! Problem Feedback: 1. Motor mount lock nuts were loose. Bolts were tight, not bent (very vulnerable in shipping) mount should be reinforced more, belt was in line, feed engages and disengages. 3. Gears: 3 pairs of plastic gears are duplicates. Cannot be used for Imperial threads as advertised with these gears. Not good. No 72 tooth gear(s). Gears should be specified in detail. Need to buy set of metal gears. 2. Cracked plastic chuck shield by hinge and when swinging it down it hits controller box (not aligned). Should be aluminum. 3. Should come with some basic cutting tools! 4. Manual is useless. TOC refers to page with Specifications but it is just a blow up image with labeled parts. I found drill chuck and MT2 taper for tailstock (and more) at Busy Bee Tools. It was clean and Fwd Rev and Var. speed work. Chuck face jaws close tight but the 3 surfaces while seem aligned have ground angles that do not match. The 2 black adjustment wheels have a lot of slop and look plastic. Overall, a great find and I took a chance because the reviews here made clear the various risks and value. To get this from a CDN source they wanted $175 to deliver LOCALLY and I couldn't even find an outlet with stock. First VEVOR order of MANY more!

I looked and hunted, and hunted and looked at a lot of small metal cutting lathes before I decided to buy this one. I even went and looked at several first hand just to see what they were and how they were built. I have to say that I am very pleased with this lathe. I bought the 8x14 version and couldn't be happier with my purchase. All I had access to before was my brother-in-law's old Craftsman metal lathe and after working with my Vevor lathe a few times has made me realize just what a piece of junk that Craftsman was compared to this Vevor. Being a retired machinist of 46 years helps you recognize good tools from bad tools pretty easily. Definetely several steps up!! Excellent little lathe!!

Super Quick Shipping..Great Value.Versatile machine.Excellent Customer Service ! Incredible Variety of Stocked items for immediate shipping.