Klantbeoordelingen voor VEVOR Diktebank, Twee messen, 330 mm brede werktafel, Schaafmachine, 1800 W, Schaafmachine, 23.500 tpm, Dubbele rollen, Rollover-beveiliging, Eén snelheid Houtbewerking, Voor hard en zacht hout

The planer itself is outstanding. The problem? If you have an unseen nail or staple in your wood and you nick a tooth on the blades, THERE IS NO SET OF REPLACEMENT BLADES AVAILABLE. On contacting Vevor customer service (a somewhat clunky and slow process), I was told I was out of luck. So consider this when purchasing; a planer with no replacement blades available is more or less a disposable item. Otherwise, it works fine.

Opino que sois unos sinvergüenzas incumplidores, en menos de una semana la máquina se estropeó y os he enviado cuarenta correos electrónicos y aún no me habéis dado ninguna solución sois unos sinvergüenzas estafadores. Recomiendo a los posibles clientes que no os compren nada, no sois de fiar

2 hónapja vettem, de jobb lett volna a 3 késes. Túl vannak edzve a pengék szerintem és 2 el is tört. A garancia viszont jól működik. A magyar vámmal kicsit nehéz volt megértetni hogy garanciális alkatrészt küldtek. Nem pontos a pengék mérete vagy a központosító csavar, így csíkos lesz a felület. csiszolással megoldható. Összeségében használható de jobbra számítottam.

I bought this a couple weeks ago and I’m not very happy with the purchase. I get heavy snipe and sometimes I get a 1/4 inch strip like the blades missed but I checked all the blades with a straight edge and none appear to be misaligned or loose. Not sure I would recommend this!

At first very impressed, however after minimal work on light wood it’s leaving grooves in the wood and the rollers don’t seem to be pulling the wood through very dissatisfied.

Solid Product but first try one set of cutters were cutting deeper than the rest. Tried removing cutters cleaning and carefully reseating but problem continued.

I was really excited to receive this planer, and I wanted to like it. I bought it for hobby woodworking after saving up for it, so my expectations may have been a little high. The planer is usable, but it has a few shortcomings. The height scale isn't very intuitive, the feed rollers occasionally struggle to pull the board through, the dust collection could be much better, and the height adjustment handle feels a bit flimsy. My biggest disappointment is the finish. The planer leaves visible lines on the wood that require extra sanding afterward. It's not a deal-breaker, and with some practice you can still achieve decent results, but I expected a smoother finish. I'm giving it 2 stars because, while the machine didn't meet my expectations, VEVOR's customer support has been friendly and helpful whenever I contacted them. I hope this feedback helps improve future versions of the product.

the carbide cutters are not the same height so you get grooves all down the work piece leaving you with lots of sanding. tried to return it but was given a 186 dollar refund instead. so have 500 into a planer that is us less for my needs.

I first rated this 3 stars: a decent machine for the price. I dropped it to 1 star because of how VEVOR handled the defect. The problem: it leaves grooves in the wood you can see and feel, as if the inserts aren't set at equal height. Not the fine scalloping you expect from a helical head, which sands out in one pass, real grooves. I reported it with photos. As seen from other reviews, i'm not the only one with this problem VEVOR's reply: their technical department stated that the spiral head uses 24 separate blades, that "minor machining tolerances" between them cause grooves, and that if I want a smoother surface I should use a straight-blade planer instead. See attachement Read that again. You pay extra for the helical cutterhead precisely because it promises a cleaner finish and less sanding. When it doesn't deliver, their answer is to buy a different type of machine. No repair, no replacement cutterhead, no check whether my unit is out of spec... Other downsides: very loud (a genuine nuisance for neighbours); the dust hood is awkward to fit, as it lifts while you tighten the bolts; and with extraction connected the outfeed flap can no longer be folded up. Moving the 100 mm outlet over slightly would have solved that. In a small shop you permanently lose space. Bottom line: don't buy this for the helical head. The manufacturer won't stand behind the finish it produces, and they put that in writing.

Machine arrive endommage. Non utilisable. Mal monter, avec plusieurs panneau lateral plier. En attente du service client.