Klantbeoordelingen voor VEVOR Beluchter, 1500x980x885 mm, getrokken gazonbeluchter met universele koppeling, zitmaaier met wisselende ijzeren spikes, gazonbeluchter voor tuinen, gazons en boerderijen

Good quality, easy assembly.

Great aerator for the price, a little work to put it together but not overly hard. Worked fine with some added weight. Used on my lawn and a few neighbours.

Used it and it works really effectively

Works as described.

Great piece of equipment very well priced Assembly had its issues as some of the pre drilled holes were in the wrong spot and some not drilled at all

Works as advertised. Please make sure ground is soft as possible for best results--after a good soaking rain or lots of sprinkler time. The prongs go much deeper. I used heavy cinder blocks and the tray should be bigger. Turning does not tear up the yard. My only complaint is that the directions are nearly useless (common complaint). Luckily, I found a YouTube video to square things up. However, no instructions on how the wheel assembly should sit in relation to the under carriage. Had to disassemble it a time or two to get it to roll correctly with prongs off the ground or in the ground!! So aggravating!!! Vevor, make a how to assemble video for each of your products!!!

The bare bones are there. I read a bit about this unit before buying. One thing everyone seemed to agree on was sharpening the tines. I did this in about a half hour with a disc grinder and a sanding disc. I wish I would have done it before assembly. Next was the weight. I just placed two 30kg cement bags on it and added two 12lb dumbbells to get me to 150lbs. Moving forward I will build a plywood box that fits the tray and fill it with cement. I think this will better spread the weight. I’ll do the math to get the right weight on the mold to create a 150lb slab. I may go heavier as I found it only made about 1 1/2”- 2” cores. I did water extensively a few hours before using the aerator. The aerator did tear as much as it cored. Hoping that in the future with some tweaks to sharpening and with more weight we can get deeper with less tearing. Possibly play with driving speed. Time will tell if it makes a difference. It was easy to assemble and is quite robust for the price point. I did have to flip around the hitch connection in order to attach it to our Craftsman lawn tractor. In first gear with 17 1/2 hp this was easy work for our lawn tractor.

Qualité correcte pour le prix, assemblage relativement facile, par contre il manquait une pièces dans l'emballage, j'ai du trouver une solution pour utiliser l'aérateur.

I have used it but the ground to hard to enable it to work properly But when softer it will work

This unit is well built, and easy to assemble. I used it with 120 lbs of weight and it did a great job.