Klantbeoordelingen voor VEVOR 203,2 mm tafelboormachine, 500 W inductiemotor, kolomboormachine met regelbaar toerental van 500 tot 2500 tpm, 0-45° kantelbare werktafel, LED, tafelboormachine voor hout en metaal

Solid little machine, easy to put together and adjust. I did, however, have to spend some time aligning the column to the base. When I attached the drill head I noticed the it was leaning to the side. Removed the head and twanged the pressed-in column so it would be perpendicular to the base. Eventually got it right, finished assembly and all looks good. Initial use shows no worries, though I can't speak for how it will hold up over time.

The drill works great. I used it to do some mortising the the set I also purchased from VEVOR. The only downside was that the largest bit 5/8” does not fit in the chuck. I used the smaller bit and the drill performed well. I am pleased with the purchase

It's a big drill and quite heavy. Sadly the assembly and quality control in China is a bit sloppy. Making the drill work as intended required some disassembly, extra grease, and adjustment. Nothing worked subtly or smoothly out of the box. The instructions consisted mostly of some tiny illustrations with a bare-bones explanation in English at the end of the booklet. It was pretty much useless as you expect from things produced in China. It took me quite a bit of tinkering and adjusting before things worked as they should. Specifically, the gears for the table height adjustment handle were very sloppy requiring an extra internal spacer, and rotating the table horizontally required the collar at the top of the column to be removed and repositioned before it could be rotated without binding. Other than that it seems to be a decent machine

A prima vista sembra faccia il suo lavoro, arrivato nei giusti tempi di consegna, per essere completo manca di basetta serrande. Comunque è un buon prodotto e un buon marchio .

For smooth work its use is aceptable. What I dislike is the support pipeline, you can not tight the fixing screw because the pipe is very thing. The motor is light power too, it gets stuck easily with not so much pressure done during the drilling. Over all, it is a tool for smoothy work.

Un buon prodotto, prezzo onesto, materiali buoni. Laser presente e regolabile ma nessuna luce, il modello che mi è arrivato non la ha. Purtroppo nel trasporto si è spaccato il collarino del misuratore di profondità, mi è arrivato rotto, nulla di irreparabile.

Drill press works as expected, easy to mount to slide out on back of truck for mobile use. All parts provided readily.

Works great for the price but they didn’t put the drive belt in it. They have since expired it and things are good.

purchased a week or so ago. Very disappointed in the way it was packed and how it was set up. Box heavily damaged. Small white foam beads everywhere. Manufacturing manager needs to be fired. No quality control. Nothing fit. Parts had orange paint sprayed INSIDE the parts that were supposed to fit over other parts. I spent several evenings after work,filings "burs" and pieces of metal as well as removing paint from the INSIDE of parts. The crank to move everything up and down the main pole would not work. I took it apart and found it was "CLOGGED" with foam pieces from the packing that were in all the worm drive gears. The support roller would not budge as it must have been hammered into place. After lots of lube and pulling using two people, it was removed. I had to re-drill the holes to get them to work. Lots of dents on the table and roller supports. I have bought over $1,800.00 worth of tools and am about to stop. The only people who "seem" to get working products are the guys who get them for free on YouTube to review.

Damaged wirh zero gelp from vevor will call bank.