Klantbeoordelingen voor VEVOR Zonne-aangedreven ventilator, 35W slimme zonne-dakventilator met thermostaat, 67960 l/min luchtstroom, ingebouwde borstelloze DC-motor voor koeling en ontvochtiging

The VEVOR 35W Smart Solar Roof Ventilation Fan Auto Temperature Control, 2400 CFM was exactly what I needed for my attic cooling application. Solar only, the fan operates as I need to move air through my attic to cool throughout the day. It is an all-metal enclosure and flange which will make it last versus plastic models seen elsewhere for higher prices. It is certainly something I would recommend to someone looking to do the same application.

The VEVOR 35W Smart Solar Roof Ventilation Fan Auto Temperature Control, 2400 CFM was exactly what I needed for my attic cooling application. Solar only, the fan operates as I need to move air through my attic to cool throughout the day in Florida. It is an all-metal enclosure and flange which will make it last versus plastic models seen elsewhere for higher prices. It is certainly something I would recommend to someone looking to do the same application.

On hot days it will turn off when a cloud passes over even when it’s still 100 degrees inside, I anticipated some level of battery reserve for the price even if just to run all day. I am still rating well because my plants would have melted without some level of exhaust fan like this. This would not be worth it if we were in an extremely hot climate, but worked great in Montana with 15 or less days over 100 degrees.

Received it pretty quick with no issues. Did a little test and put it out side and as soon as the sun hits the solar panel the fans comes on but any shade it turns off. Easiest part is no wires to hook up, just runs while sun hits the panel. Only time it will not run is when it's in the shade or dark or under a certain temperature so in winter in it won't run unless it gets to a certain degree.

So far so good ! Installed about a month to go ! Easy to do , use bottom support plate as template and make circles pattern then use drill to make a 1/2 hole on within circle ⭕️ pattern then use a sawzall to cut out shingle pattern (no need to remove shingles!) After remove shingle pattern (circle cut out) lift up some of top shingle to allow the support plate to go under them! Put roof cement or silicone and screw down plate and trim shingles to go around support plate (note some of support plate will be showing ) Caulk under shingles to secure them ! All DONE

De gebruiker vond het product erg goed en gaf het een beoordeling van 5 sterren.

fan works great but only work when sun is out no power after sun goes down

This works really well; Make sure you compare models to get what you need as they have many options

Works great 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

Works exactly as needed, at a great price.