Klantbeoordelingen voor VEVOR 48" werkbank, draagvermogen van 1500 lbs, werkbank met uitschuifbare lades en wielen, verrijdbare werkbank op wielen, stevige werktafel met eikenhouten blad voor garage, werkplaats, kantoor en thuis

Ist ok aber mehr auch nicht. Der Tisch sieht gegenüber dem ohne Steckdosen sehr anders aus. Die Steckdosen sind nicht zu gebrauchen. Diese machen einen absolut minderwertigen Eindruck. Zudem sind diese sehr schlecht sichtbar mit Max 10A gekennzeichnet. Das spricht schon dafür, dass die wahrscheinlich gefährlich sind. Ich werde diese mal öffnen und die Kabelstärken messen. Insgesamt für diesen Tisch - keine Empfehlung….

Very disappointing, there was some minor warping or bent metal, though it's minor wasnt really a big deal. What is a big deal is the draw system. The rail system for the drawer was installed on another piece of metal that is predrilled to be secured to the inside of the leg. However the holes do not line up. I contact customer service (which is very slow to respond) and they told me to remove the screw that is securing the rail to the piece that is to be installed on the table. That doesn't fix the hole Alignment issue but to follow their instructions to install without that screw the drawer system sags heavily on the left. After going back and forward with their email customer service for over 2 weeks I decided nothing can actually fix this. I removed the drawer system and now I have an over priced table. Save your money and go with something of better quality not something this company will tell you to modify.

This workbench leaves a lot to be desired as is very wobbly at highest setting with casters locked and drawer brackets didn't line up and drawer kept falling out. When I tried to pull brackets into to align with drawer, they broke off due to the small screws holding them in place. Should've went with the work pro that I planned. Legs need more bracing to prevent wobbling at highest setting.

On opening the package one part of the table top was cracked. This is the 3rd time I am buying from vevor and the item came damaged.

So far I’m 2 for 2 on messed up items. First was the gun safe that was missing screws to finish putting it together. Now I had to make custom modifications to the work branch. The front nuts and bolts on both guide rails, that were reassembled from the factory, clashed with the legs of the table. The instructions were vague so I figured, maybe it’s supposed to taper. After I build the drawer and tried to slide it in, I realized it was wrong. I took it back apart and used a grinder to bevel the corners so that the nuts from the guide rails can allow the guild rails to sit flush. I would say you get what you pay for but these weren’t that cheap… Know I know, with every purchase, so modifications are required.

Arrived with the work top smashed all to hell, revealing that what looks like butcher block is actually just veneer, if that matters to you) and then customer service gave me the runaround for more than a week, by which time I had purchased another bench elsewhere. They can keep my money - it's the last they'll get from me.

Didn’t was delivered with care it has scratches all over and dents that was the top side and the bottom it looks like they where try to cover holds on table with wood putty

Product showed up dented and banged up top from shipping / poor packaging. Sent pictures and Vevor's suggestion was to somehow magically get it all back in the box, and haul this giant heavy box to mail it back (?!?)...or...somehow go through the enormous effort to cut up the giant metal table so it was unuseable, take pictures and submit for refund...but then what? Put it in a garbage can? Seriously? Not happy with Vevor...

The table top is sturdy and solid, however the frame is not, to say this holds 2000 lbs. is a bit far fetched. Maybe it will hold that with no movement and a perfectly smooth floor for movement. I had moderate weight on this, moving it over a slightly uneven floor and the legs folded in on ones side at the point of attachment to the top. It lacks at the very least gussets to stabilize the legs with the top. We removed the entire bottom and welded a frame made of 2 inch angle along with better wheels. I suspect this table could now hold well over 2000 lbs.

The workbench itself is fine and it went together relatively well. Instructions weren't terribly clear which crossbar went to the front and which went to the back but it was simple enough to figure it out. I had tried to get answers about the height of the drawer to determine whether some of the items I intended to put in the drawer would fit. Chat created a ticket for Support to answer but Support never got back to me except to say that my ticket was closed. If this is customer service, Vevor is TERRIBLE at it. The lack of support is the main reason the rating is low.