Klantbeoordelingen voor VEVOR WIG-200C TIG/MMA ARC Combo Lasapparaat Inverter 20-200A 40W 230V Lasapparaat, 1-3,2 mm TIG-elektroden, 1-4 mm MMA-elektroden, IP21 waterdicht, automatische uitschakelfunctie

très pratique et efficace

I purchased this little welding machine and was initially skeptical. The price was low, and it had only basic functions. It features TIG with proper high-frequency start and gas delay. As a former welder in the '80s, I was used to KEMPPI TIG machines, which had many functions for controlling heat input. The TIG-200C, however, includes only the essentials for welding. I haven’t used the ARC function yet. The TIG torch is light and flexible. I used a 1.6mm RED tungsten electrode. I was disappointed that a 2.4mm tungsten clamp was not included. The goggles that came with the machine offer basic eye protection but not much more. I tested the welder on 1.2mm steel and a 30mm diameter pipe with 2mm wall thickness. The machine works great! I’m impressed by its size, its simplicity, and how well it welds. For what it is, it performs exceptionally well, and I can use it for all the tasks I can imagine. What am I missing? A set of consumables: 5 carbon steel TIG rods 5 super duplex TIG rods 5 basic carbon steel electrodes 1.6mm tungsten electrode with clamp 2.4mm tungsten electrode with clamp I think it would be a good business case to offer consumables, safety masks, and welding gloves for TIG and ARC as optional accessories. However, I am super happy with the welding machine and its performance!

Óptima máquina qualidade preço. Excelente para soldar inox com o processo Tig. Tochas razoáveis para o preço. Adquirindo kit gas Lens da um acabamento ainda melhor a solda.

très bien super ,mais j'ai changé le flexible de soudure sinon soude très bien ,très fluide super machine à recommander idéal pour inox

Olen hankkinut Vevor TIG-200C, 200 A TIG/MMA ARC 2 in-1 hitsauslaitteen HF IGBT DC inventterihitsauskoneen 30.01.2025. Olen nyt tutustunut koneeseen ja jopa vähän hitsannutkin TIG toiminnoilla. Laite on mielestäni täysin opeteltavissa käytön suhteen, sillä käyttöopas on samanlainen puutteellinen, kuin Kiinalaisissa laitteissa yleensä. Kone toimii kohtuu hyvin, lukuunottamatta säätö arvojen tallennusta, sillä säätönuppi pitäisi ojjekirjan mukaan olla lukittavissa painamalla 5 sekuntia nappia pohjaan lukitakseen siihen säädetyn esim aloitus ja lopetus kohdat ja sieltä väliltäkin. Nappi ei kyllä liiku sisään- eikä ulospäin milliäkään, joten arvojen asettelut ei toimi, mutta jospa joku lähettäisi vieläjosktain uuden toimivan säätö- ja lukitus napin, pääsisin taas hitsaamaan TIG hitsausta. Kone on hintansa väärtti muuten, elikkkä pelaa, kuin Buick henkilöauto.

Bonjour, Ceci est ma 2e demande svp: Merci de bien vouloir m'envoyer une facture acquittée pour cette affaire svp. Voici mes coordonnées: AIRLANT 61, rue du vinave, 4431 LONCIN TVA: BE0687.484.728 Merci, Marc

Nice peace of equipment. Have just tried it with stainless steel, and that was ok. There was, however one thing that was not ok. There is a large power surge the moment you switch the machine on (or plug in the socket , if the machine is "on".) The power surge made the 16Amp fuse to blow, so I had to install a surge suppressor (NTC thermistor) on the power line inside the chasssis. After that all is working flawlessly.

Good for the price, but i was a bit dissapointed with the TIG welder hose / trigger. The trigger is literally fastened with a cable tie, and it looks pretty bad. It works though, so no complaints there. Be aware that when TIG welding the hose for the gas outlet with the trigger can get REALLY hot.

Trop puissant pour mon installation électrique, je ne peux pas la juger. Refus de reprendre le matériel car pkus de 30 jours après l'achat, même pour un échange, alors qu'il est neuf et non déballé.