Klantbeoordelingen voor VEVOR Garagetent 304,8 x 304,8 x 259,1 cm Garagetent gemaakt van gegalvaniseerde stalen palen en een drielaagse 240G PE-afdekking Opslagtent Carport 250 x 215 x 187 cm Tentdeurmaat Uitrusting Tent Grijs

VeRyan nice unit. Easy to put up and looks like fairly good quality. I would recommend this product.

This is a well made and heavy portable garage. Very happy with it. I am a 70 yr old woman and was able to put it up by myself.

I am disabled but, I put this up by myself in a few hours. So far it is standing strong. Fitment of ends and main cover are the only areas I see that need attention. I am using felcro strips to seal them together and seems to be working good. My JD LA145 tractor with the 44" snow blower fits with room to spare.

everything went together well mostly. the only thing that was wrong is that one of the holes for the detent on the peak X bar was on the wrong side. I didn’t care that much. I just ran a self tapper through the other side.

Shelter is great. Assembly wasn't too bad, I did it by myself (a second person would have made it a lot easier!). Four stars instead of five because one of the plastic zipper teeth already went AWOL-- I anticipate more of them will go missing as time goes on, until zipper no longer works

Easy set up, rugged and worth every penny. The goor is a pain by yourself but we are building a rigid front for it with a real door. I’ll probably get another one soon!

Bought this to temporarily keep items from garage in until we build a permanent shed. It was pretty easy to set up but had to buy longer ties for fastening the tarp like cover to the frame. I can not comment on the durability of the canvas as we here in Cleveland, Ohio have yet to receive snow this year. Keeping my fingers crossed that wicked snow will be no match for this shelter. We used duct tape to tape up the back of the shelter and placed pallets on the floor to keep items off the ground.

Just what I needed

The tent is made out of a plastic tarp material and will not last longer than a few years. The front and back aren’t sewn to the top and sides, and there is no floor. I wish it was more durable and weatherproof.

So this is the second "portable garage" I've ordered from Vevor. The first was smaller and had a thicker silver material. It has survived a Maine winter and seems to be holding up well. And it actually is portable - I moved it about 100' without disassembling by attaching a timber across the back and putting some small wheels on the ends with lag screws. Worked a treat This model is larger and has a thinner cover material. It's beige which blends in better with my house but given the use of these items, I'd actually prefer green or even camo options. The zippers on the silver one are very robust and when rolled up there are plastic buckles to hold the rolled door up. They are not very high quality but I don't use them all that frequently The zippers on the larger beige unit in this review are much thinner/lighter - like something you'd find on a pillow cover. I don't hold out much hope for their long-term survival but again, they won't be used daily. The rolled door is held up by some sewn-on Velcro™ loops. Effective enough. I put a piece of PVC pipe on the door end (cut a slit with your table saw) to make the doors easy to roll up. You can also use plastic electrical conduit The instructions are good until they are not. There is a clear diagram of how all the pieces join up and the poles are all IDed with stickers. Very good. However, the cover is packed folded with no suggestion of what is front/back/sides or even inside/outside. Nor is it all that obvious from the tiny images All parts were supplied and there are even a couple of extra elastic bungees and bolts. But on the beige model, it seems they ran out of the correct size bolts and substituted smaller (5mm) carriage bolts and wing nuts. The heads are so small the square part that should "lock into" the holes in the brackets just spins. I spent $5 on 1/4X20 2" carriage bolts and Nyloc™ nuts for a more secure result. I also sprung for washers under the bolts. Woo hoo! I attach the feet to long pressure-treated timbers rather than use the pitiful little ground stakes included. I further "nail down" the timbers using 4' rebar bent into a "tent peg", so almost all of the 4' is in the ground One small issue is the shipping box doesn't provide a huge amount of protection to the tubes, so some may be distorted from the box being dropped. I needed a pair of pliers and a rubber mallet on the silver one but not the larger beige one - just the luck of the draw I'd add a photo but the specs are ridiculous - I used to teach Photoshop so I could do it - I think the specs for a US passport are more flexible :-) "Please provide JPEG, GIF, or PNG. width at least 500px and Height must 600px. All the photo size should not exceed 2 MB."