Klantbeoordelingen voor VEVOR rolstandaard met een draagvermogen van 1134 kg, rolstandaard #45 van staal, in hoogte verstelbaar van 690 tot 1320 mm, opklapbare standaard, steunstandaard, werkstandaard, montagestandaard voor tafelzaag, schaafmachine en schuurmachine.

Well constructed, heavy duty. Only flaw I've encountered is the placement of the lock down bolt for the threaded shaft. When dialing in the stand to height, the bolt is in the way of the adjustment handle when trying to lock it in place. Thinking that lock down bolt should be about an inch lower.

I use these to build feed augers. They are 23 feet long and 1400 lbs. These work amazingly well to be able to roll them to weld.

Arrived in time, packaging is not the best. The parts are shipped only wrapped in bubble plastic and in a carton box without any other filling material. They arrived with a few scratches on the lower assembly but nothing major, just some paint chipped off. The biggest dissapointment is the roller itself. In the picture it seems to be galvanised. Unfortunately, the ones (I ordered 2) came with some sort of paint. And 1 roller is severly damaged that it is practically unuseable, if the part that needs to roll over it may not be damaged. Looks like someone clamped it at some point, it is not because of the shipping, because the part is wrapped with plastic separately and the plastic wasn't damaged. Someone clearly knew what they were sending away. I hope this can be solved in a proper way. Otherwise, you get what you pay for, nothing fancy and could be made better at some points, but you can't make it yourself for this price.

The stands are OK but the rollers were locked up. I had to disassemble the rollers and hone the tube out to seat the bearings properly. The bearings had been pressed in to tight and would not roll.

Wery rough surface on the rolls. The bearings does not spin. A bit disappointed.

Took a long time to deliver courier stuffed up Bottom bolt stripped had to rethread hole and bigger bolt ! Otherwise is Ok

Orderd this stand because I needed one more th esame height as 2 previous stands I had from Vevor. Thes ones I had previously purchsed were not available in the matching size I needed so I orderd this one. Every part on it is physically smaller, weaker and looser. It doesn't hold where you set it . The support shaft is appx 1/4" smaller thatn the tube it is in so it doesn't grab light it should The leg spread is much smaller so it is not very stable and the fittings are low quality . they strip the eir threads if you look at them wrong. If it wasn't a pain to jump thru all Vevors hoops for a return I would send it back. Instead I will send it to the scrap yard later this week so no one gets hurt using it.

Klemmt Verstellung funktioniert nicht, ein Riesen Theater wegen der retoure vevor schickt keinen retour Schein.. Verstößt gegen das fernabsatzgesetz werde jetzt zum Verbraucher Schutz gehen.