Klantbeoordelingen voor VEVOR Professional Kernboormachine Magneetboormachine Magneetkracht 12500 N, 850 tpm 1450 W Magneetboormachine 40 mm Max. Boordiameter, Magnetisch kernboorsysteem voor scheepsbouw, bruggenbouw, etc. Oranje

The drill works well and has decent power. When I fist tried to use it, the rotation was reversed from the switch position. I called I sent an email to Vevor and they send me directions on how to correct the issue. Great customer service. The other issue was the coring bits were not the 50 mm as described. But, the bits that came with work great. Overall, I'm happy with it.

Bonne machine , rapport qualité prix très intéressant, dommage qu'il n’y ait pas de variateur de vitesse sur ce modèle .

Habe mit der Maschine noch nicht richtig gearbeitet - sieht aber solide aus und scheint das geeignete Werkzeug für meine Bedürfnise als Heimhandwerker zu sein.

This is a tool I only need a few times a year, so it was hard to justify spending 2-3x this amount for a similar model from a competitor. When you consider this package includes the cutters as well you are getting a lot for the price. I’ve used this several times now on a couple large projects- lots of holes - and it handled them with ease. The magnet is rock solid. My only complaint is the cutting oil system is fickle. It either doesn’t want to dispense oil or it dispenses way too much.

The VEVOR Magnetic Drill Press offers impressive value for metalworkers, fabricators, and field installers looking for reliable drilling performance without the high-end industrial price tag. With a 1450W motor and a boring diameter of up to 2 inches, this mag drill hits the sweet spot for medium to heavy-duty work, especially in structural steel, plate, or field-fabrication environments.

THE PRICE POINT IS NICE. THE MAGNET SHOULD BE STRONGER. IT DID LIFT TWICE WHILE DRILLING THREW 3/16 PLATE STEEL. AFTER 14 HOLES THE 16MM ANNUALAR BIT BECAME DULL AND NOW SKIPS. WILL BE USEING MORE ONCEI REPLACE THE 16MM BIT.

Seems to be a quality product for the price. I had to run a thread chaser through the threads on the rack shaft for the handles to be able to thread in, but other than that it was easy to assemble out of the box.

At first glance it looks stable and well built, but after about 40 drilled holes with diameters of 28mm and 30mm in 15mm thick iron there are doubts. The speed control is very unstable and varies greatly on its own at low speeds. But worse is that the sled is loose in the guide rail and there is no adjustment option for this. This means that the precision of the drill hole placement is not up to standard and that the drill wobbles on the surface of the workpiece. Otherwise it works as expected.

Easy to use. 2" in steel is pushing it, probably stick to 1" max as the motor doesn't have enough torque. Great value for the price. Magnet is not stafe and doesn't stick well for larger bits - use a clamp as safety

Works good for the price. There is a little head wobble when starting the hole that is my only complaint. Drilled 36 one inch holes so far with it.