Klantbeoordelingen voor VEVOR Professional Kernboormachine Magneetboormachine Magneetkracht 12500 N, 850 tpm 1450 W Magneetboormachine 40 mm Max. Boordiameter, Magnetisch kernboorsysteem voor scheepsbouw, bruggenbouw, etc. Oranje

Polecam , wszystko w porządku sprzed godzien poldcenia

Odličan snažan alat

This is probably the smartest way of saving money. We drill more then 50 holes in 10mm steel beams. The only thing we had to do is to re-tighten the electrical connection as the magnetic part got disconnected few times. I recommend to use the tightening strap for safety. Otherwise, I fully recommend it

Bonne machine de bonne qualité avec une facilité d'utilisation surprenante. Très étonné à la vitesse où j'ai pu réaliser les trous que j'avais à percé. Le réservoir fait bien le travail aussi.

This is a great drill for the price. I looked at many seemingly comparable ones and they all cost at least $800. I've been using this to drill out old bolts that have broken off on the side of my cast tractor casings. It's been more than up to the task. The magnet holds it reasonably firm and the drill itself is more than powerful enough. The bits have been able to drill into grade 8.8 bolts.

This drill is solid feeling and has a ton of adjustments available for many tasks. The magnet grips well to keep it in place. It has had no issues drilling any of the holes accurately. It is louder than I thought it would be but I wear ear protection normally anyway. This was a great addition to my tool kit and I will be using it a lot more.

muy buena maquina muy util

Worked better than I expected. I used a 11/16 vevor cutter and drilled 22 holes through 3/4 inch steel plate. And the bit is still in good shape. Also used the 2inch cutter and cut 16 holes through 5/8 steel and it is still sharp. I used cutting oil in drill and used hand pump oiler can for additional cooling. Probably not ideal for everyday use but for an occasional job it works great for the small investment.

I was dreading the thought of using my bench drill press for a sculpture (which so far weighs 100 KG) but would necessitate trying to clamp the sculpture upside down and due to 130+ lengths of 10 mm diameter steel rods, would have been absolutely impossible to secure. Using the oxytorch to blow holes through was out of the question to avoid heating basalt rock. That's when I saw John Cadogan's video on the Vevor Magnetic Drill. The perfect solution! However, while my workbench is made of steel, it's only 7.5 mm thick, so I made a metal base 20 mm thick for the magnetic clamp. Now I'll be able to complete the sculpture, which would've been very difficult without this tool.

This drill is a great deal, drills very well and has an extremely strong magnet. I have used it to drill through 1in plate down to 11ga. I have even drilled holes with it upside down, great product