Klantbeoordelingen voor VEVOR Mobiele Basis, 1500 lbs capaciteit, verstelbaar van 20" x 24,5" tot 28" x 33,5", Robuuste universele mobiele basis met 4 zwenkwielen, voor houtbewerkingsapparatuur, lintzaag, elektrisch gereedschap, machine

Ein super Produkt und eine sehr gute Qualität. Ich werde es noch einmal bestellen.

Very happy with this. Moves my bandsaw around without an issue. It's solid and tools smooth. I recommend it.

It is well made and fairly easy to assemble. I would have created a rectangular square hole guide. E. G between 15.5 and 17 use hole ...That way it would be faster. On a related not it should have either a solid base, or a larger corner support for mounting the base. It can still slide around on top of the support. An alternative would be some large screws that pushed in on all sides of the base using the holes on the 4 sides. I'll probably build something to hold it still. Finally, the base is angled when set up for moving. I would have like to see the design keep it level and raise and lower floor stops, not the whole frame. It works but when you have a 500lb top heavy drill press it's a little never racking to roll it around on an angle.

As others note, this is a well-made and reasonably-priced product. However, it has a design detail that makes it a big disappointment *for my purposes* and possibly won't affect your use. Every other mobile base I have has a foot operated lever at each corner just as this one does. However, on the others, when you push the foot down, *the wheels* are lowered to raise the machine off of the stationary feet. This base does just the opposite- pressing the foot lever raises the machine via the stationary feet, and when the levers are lifted, *lowers* the machine onto the four wheels for transport. I have a heavy table saw (Saw Stop ICS) with a 54" extension table that has two legs for table support. I expected I would be able to *lower* the machine onto the roller stand's stationary feet (and hence, the extension's support legs) and *raise* the machine via the wheels which would raise the extension table legs enough for the machine to move. Big disappointment for me that it doesn't work that way. So give this some thought if the item you are moving has any load bearing anywhere other than the roller stand. Otherwise- the wheels are large enough to accommodate my not-perfectly-smooth concrete shop floor. You have to fiddle with the adjustments on the stationary feet to ensure they will clear any unevenness of the floor when the machine is lowered onto the wheels. I still don't have that dialed in quite right yet, but hopefully there is enough clearance to allow for that.

The base is rated for 600 lbs, but the bolts supporting the caster wheels have bent under the weight of my 450 lbs tablesaw. This makes the casters difficult to spin around. I would not put anything more than 300 lbs on this base.