Klantbeoordelingen voor VEVOR LVLP verfspuitpistool, zwaartekrachtspuitpistool en 3 spuitmonden (1,3/1,4/1,7 mm), 600 ml inhoud, verfspuitset met luchtregelaar voor meubels, autolakken en doe-het-zelfprojecten

Good quality for the price, feels firm and controls are tight, thanks.

J’ai eu un problème par la suite, le SAV a réagi parfaitement

Bonjour, jeux de trois pistolet à peinture de très bonne qualités, j'ai tardé à laissé un commentaire car ce n'était pas pour moi, mais pour mon frère !!!!!!! Cordialement, Gilbert G

Impeccable 👍

It’s a good value item, not for professional use, fair quality would buy again when in need for DIY small jobs

Works well for the price point

Awesome tool should have bought way sooner

Bon produit

Acheté il y a 1 mois, excellent produit même en basse pression. J'ai repeint une moto de piste complète avec une peinture de qualité, très bon résultat ! Les différents réglages offrent de nombreuses possibilité de voiles, le nettoyage complet du pistolet est très aisé, très satistfait. Je recommande

I've used this spray gun with hydrated lime to spray old European stone/concrete cellars with high moisture. It did the job. The gun itself is very rudimentary, as it's basically just a feeder for the material in the hopper with a trigger. The hopper is held in place by a hose clamp and the mating surface on the gun has an O-ring, but that doesn't make the best seal, so runny materials can still seep through and end up on the side of the gun. The connector/adapter the gun comes with is meant to be hooked up directly to a naked hose, meaning it doesn't have a European quick connect. I took one from a different gun. The connector itself is glued in the gun and can't be unscrewed, so an adapter has to be screwed on the existing connection. The air once hooked up is always spraying, meaning the trigger doesn't control or adjust the amount of air at all - you need a regulator or an inline valve to control the air. I just uncoupled the gun every time the hopper ran empty since I had neither. Given that the material I was spraying (lime) wasn't very runny, it handled it extremely well - I used the widest nozzle (8mm), but could've gone with a tighter one to reduce consumption.