Klantbeoordelingen voor VEVOR Kabelstripmachine 1,5-30 mm Kabelstripmachine Handmatig of boormachine Kabelstripmachine 130 x 130 x 300 mm Ideaal voor het strippen van gecoate monofilament meeraderige draden

I mostly tried 1.5 mm cables. The smallest socket needs to be at the lowest position so that the cable doesn't slip. But then it's really time consuming to place the cable between the rollers. Also the blade doesn't seem to be exactly in the middle. I'm super disappointed and don't understand why the device has a high score.

This thing is junk. It doesn’t work as advertised

Le moteur ne fonctionne pas et le service méditer remboursé

Very surprised and disappointed at lack of quality check of unit before packing and shipping. Unit came partially assembled, Black plastic handle was already attached to metal handle arm which should attach to main body. Main body comes with a black metal D-shaft section (drive flat section) so as to attach the handle arm securely. The handle arm does not come with a corresponding D shaped hole in the arm,this would have improved its build quality. When trying to attach the handle arm to the shaft, it was noticed that the threaded pilot hole for the M8*12 hexagon screw (item 6 page 5) was not in the correct position on the arm. The M8 threaded hole appears to have been incorrectly installed at the wrong end of the handle arm next to the black plastic cylindrical handle. This has made the unit inoperable unless, we drill and tap the handle arm ourselves or replace the handle arm with an arm incorporating a D-shaft slot and M8 threaded locking screw hole. When you purchase a piece of equipment, we would normally expect to be able to use it fairly quickly once bolted and screwed together. In this situation, unit is unusable until handle issues are resolved.

0.05” wire (16 ga) wire it claims to do,.. witch is why I choose this single wheel model. And let me tell you personally it does not work

This product worked out of the box then within about 1 minutes started making a grinding sound in the gears. Contacted customer support which is a absolute nightmare of a process and extremely time consuming! Took approximately 2 weeks of back and forth emails with days of zero reply or care from Vevor. The END RESULT WAS A $95.00 DOLLAR CREDIT BACK ON A NON WORKING MACHINE THAT RAN LESS THEN 1 MINUTES WITH VIDEO AND SOUND PROOF THAT IT WAS NOT WORKING PROPERLY! So on a $209.00 dollar machine that Vevor says was not in working in order from the beging Their answer was give less then half back to the customer. So purchase at your own risk and be ready for them to do nothing if its not in working order when it gets to you.

Cumpre o que promete manualmente, porque com a furadeira não funciona bem, lamentável não vir os parafusos para fixar a máquina na mesa.

Works well with larger wire but unable to strip smaller wires that are within the advertised range. If you plan on stripping 12 or 14 awg wire this isnt the stripper for you.

Poignée noire en plastique trop fragile premier jour cassé pourquoi mettre une poignée en plastique sur un vis en métal

Het is gemaakt voor wat het dient.. Er zit echter net te veel speling op het snijwiel waardoor deze voortdurend naast de kabel glijd en de kabel komt vast te zitten in de plaat die de kabel begeleid.