Klantbeoordelingen voor VEVOR 37,77cc benzine T-paalrammer, 4-takt benzine hekkenrammer met 3 paalkoppen (45/55/88 mm), draagbare 1000W palenrammer voor boerderijen, ranchhekken en wegverbeteringen

Product performs as describes. It is heavy, but that is the reason it performs!

We bought this t o put in wooden posts and to drill holes g o help plant fruit trees. It has worked well

I bought the machine mid July 2026. It's heavy and rudimentary. Because of the weight, it is difficult to position the unit on top of a 9ft pole to sink it 3ft into the soil. STOP Button is too easy to touch while operating the unit, switching it off unintentionally. It is also not well designed. Will only start and run on full choke; reducing the choke after a 5min warm-up will kill the engine. “Easy Start” did not seem to function on the unit I purchased. Starting the driver needed to happen on the ground, as it is awkward to hold to re-start while on a ladder or elevated platform. HOWEVER, I succeeded in sinking twelve 9ft fence poles (MASTER HALCO from Rona) over three days in Mississauga clay. Mind you, I probed the ground with a 4ft threaded rod chucked into a drill. The post driver will not overcome stones, bricks, and tree roots when pounding in clay; in sandy soil it could be different, but that I do not know. It would appear that a motorized post driver is not available for rent in the GTA and further north to Georgian Bay. I checked the usual tool rental companies (Coopers, etc), only Home Depot in Etobicoke had one for rent when I inquired, but it became unavailable when I wanted it because it was broken; HD was not going to get another one, or so the story goes. US branded post drivers are well in excess of $1,000. Options for sinking piles in heavy clay soil are limited, particularly for fence replacement if one wants to do it as a DIY project. A 50ft six feet high fence, 150 boards, 3 rails, cap, and held up by 12 posts, including all SS screws and the VEVOR Post Driver, has a price tag of about $2,300.00. And I keep the machine for future projects or sell it and recoup some of my outlay. Was it worth it for me to purchase the VEVOR Post Driver, or would I rather be on a 10-foot ladder and hammer away at 9ft steel posts? While not perfect, the unit fits the bill in more ways than one, and I am glad I was able to buy it.

Starts every time, good on fuel and probably as heavy as I'd like to go for this type of machine that sometimes needs lifting above shoulder height. Interchangeable collars are handy although if the star pickets is slightly larger the opening is so precisely cut that a slight dimensional change in the head of the picket won't let it fit. Great for soft ground. Won't push through small rocks and shale though. Needed to go back to the manual version to get through the rocky area.

One of the best investments you can make, if you have post fences. I had to put in a total of 60 post, both pipe and tbar. 2 hours, 1.5 tanks of fuel. Worth every penny.

Easy to set up and use. Used to install poles for a chain link fence and also used on putting in dock poles. Works at it should, no issues for the last 3 projects over the last 9 months.

We were about to give up trying to get this to drive a t-post and had even reached out to return it. We found a youtube video that gave us some tips on what to do. You will need to let the post driver warm up for 5 minutes then set it on half choke and leave it there. Then when driving the post you don't want to go full throttle. Works like a xharm and seems to get better every time we use it. Of course it's not going to drive through rock but it does work great for the price. Very happy with this purchase!

This tool saved me many hours of work, and I really could not have done this job without the post driver. I used it to drive 2x6 boards into the ground in front of a lake wall to seal the areas undercut by the lake eroding the soil under the original wall. I tried driving these boards in using a sledge hammer into a heavy clay soil (lake bottom) and was only able to get 8" deep. The post driver was able to get to an average depth of 15 inches. I made an adapter (on 2nd board from right in the picture) to connect the driver to the boards. Like other have noted, using the low speed, just a bit above idle worked best. And when it reaches a point where no further progress can be made, stop to avoid breaking the tool or your work. It is slow but steady. Super easy starting.

Excellent product…we will continue to support VEVOR and its products especially if their products remain top notch!

Amazing product you won't be sorry you bought it