Klantbeoordelingen voor VEVOR Telescopische snoeizaag 1,5-6,1 m Uitschuifbare snoeischaar, scherp stalen blad voor het snoeien van hoge takken, met lichtgewicht aluminiumlegering handvat en een chenilleborstel Stok snoeischaar Handleiding

Hay que saberlo usar como todas las herramientas pero una vez que se toma practica funciona perfectamente y si bien es dificil llegar a los 8 metros de altura resuelve el problema de los cortes sin necesidad de contratar una elevador o a un profesional. buena calidad y bien empacada como siempre vevor

The first ad I saw for it was for forty eight dollars, the second time I looked the price went to seventy eight?? I Like the small pole sections, and how they go together, nice system. With only one Male threaded pole section, on a job its not to convenient. Having to unscrew one attachment, to install the other. That is why I ordered the other threaded part, which I didn't specify the Male threaded number three part, and you kindly sent the female threaded one. I hope the correct part is in my shipment due soon. Thank you Jon

I really like this saw pole set up. I think the engineer that designed the saw attached with just a wing nut and stud mount. Should be looked into more. The wing nut keeps loosening itself while sawing a branch..

Utilisé pour couper des branches hautes (environ 6 mètres). Il faut ajouter des sections quand la perche est en position verticale, l'ensemble est difficile à soulever s'il est assemblé au sol. Le tout n'est pas léger mais la scie coupe très bien et le travail est fait.

Säge schon mehrmals benutzt. Funktioniert sehr gut. Leichte Handhabung. Am Anfang bedarf es einiger Übungen. Bei dickeren Ästen muss man lange sägen, bevor die durch sind.

Pratique et efficace, est juste un peu lourde lorsque toutes les rallonges sont utilisées - je recommande

Overall service and quality good and does the job. Poles seem heavy if you have a lot to cut off, one area it could be improved is the saw blade seems a bit flimsy/ but still cuts fine

This Pole Saw works great but when all eight pieces are assembled it is definitely not lightweight. It's very heavy. I used it to trim seed pods from two 30' royal palm trees. I had to use all eight sections. It's so heavy in that configuration, you cannot pick it up simply by raising it off the ground while holding the "handle" section. I had to pick it up in the middle, balance it, then use a 10' step ladder to guide it up to the seed pods. It cut them with ease, which was great. However, when it's time to lower it back down to the ground the weight causes it to fall quickly with no way to stop it. Luckily for me I have hedges around the palm trees so it landed on those instead of simply crashing into the ground. I'm not sure it would have survived that. Anyway, just be aware that a length of 27' with a metal saw on the end is not going to be "lightweight" no matter what it's constructed of. I'm glad I bought it and would recommend it with that one caution.

Stokzaag en snoeischaar zijn goed te gebruiken en de schaar is vlijmscherp. Wel zit er enige speling in de aansluiting van zowel de zaag als het snoeimes op de stok. Hierdoor bewegen de zaag en snoeimes zo'n 3mm t.o.v de stok. De speling heb ik opgelost door een plastic buisje over het montagepunt te schuiven en daarna de schroeven aan te draaien.

Super easy to assemble, and I followed the suggestion to work in the extra sections as you work it up the tree. That info made it possible for this 68-year-old, mobility impaired, 3 joint replacements, plus lifelong arthritic woman to cut not only the 2" thick branches but everything up to 8" thick limbs using all 27' of the pole saw! I removed 3 smaller branches, 2 larger stubs sticking out from the trunk, and 2 super thick limbs way up. I was amazed at the sunlight it allows into the yard! I cut every limb off right at the trunk. I'm 5' 6" and realized quickly I couldn't leverage it up due to its weight and angle of the end hitting the ground. It is flexible, but the blade is sharp, bites in quickly, and stays in the groove. It is more limber than expected, but I adjusted to that. I used my other saws to break the limbs down to haul out front. I worked each afternoon over 4 days and love the job it did! I invented a new system for the monster limbs by sitting in my heavy-duty outdoor rocking chair and holding the pole saw, rocking back and forth when my arms got tired. Hey, not lazy, just creative, plus both rotator cuffs are torn, lol. That limb took 2 hours straight using the full 27' of the pole, yeah, really, but it is now waiting to be hauled away! I DO IT ALL!