Klantbeoordelingen voor VEVOR Gazonrand, 10-delige set, 1016x114,3 mm, Bedrand met 11 bevestigingsclips, Gegalvaniseerde stalen bedrand, Gazonvellen, Maairand, Metalen palissade voor bloembedden en tuinpaden, Zwart

Great product

does what you need

Great product!! Removed rotted timbers and old pavers. It look gave a beautiful high end look

Easy to install and join together with the clips. Workable yet rigid when set. The price vs the quantity & quality was spot on. If we're to need another area of border, I would reorder more

I was pleasantly surprised at the quality of these metal landscape edgings. They were easy to install after properly preparing the ground (soaking with water to soften). Use a rubber mallet and length of 2x4 (18") to pound in and you won't have any problem. The edgers are thicker than I expected, and due to the scalloped/ pointy bottom edge, difficult to bend in smooth radiuses. They tend to crease at each high point in the scallop, but it is a minor thing and still looks great. This is not a defect in the product, just a defect in the way I tried to curve them. They connect together easily for a continuous length, and hold a straight line better than I expected. I would buy them again, and for the money, they are a robust, attractive alternative to cheaply constructed plastic edgings that can be destroyed by trimmers and mowers.

This edging is the best! We've done a lot of landscaping, and this has proven to be the best by far. It goes into the ground solidly, and holds up against the weight of river rock. It bends into any shape - we made large rings to rim our flower beds and hold the mulch in and the rock out. And the price is great too!

I did a lot of research and purchased the BROWN steel edging. I wanted to install it so I could run our lawn mower along the edging but it wouldn’t be really visible. By leaving 1.5 inches above level, I believe I was successful. It bends easily if you follow the instructions. I will be purchasing more.

I Love how easy these are to put in place and stay in place. I used them to hold dirt and mulch back on a hill where I planted some small arborvitae. I also like using them with a brick edging along the grass in front of them.

We had great success installing this galvanized steel edging. I set two stakes and ran twine between them (not included) to create a straight reference line, then used a landscaping edger to cut a shallow trench. This made it much easier to break through the coarse grass and keep the edging aligned. To install each section, I used a small 2x4 block and a rubber mallet to tap the pieces into the ground and level them. After everything was set, I added the connectors, which finished the look nicely. I started with a smaller garden bed to test the product before tackling a larger area, and I’m glad I did. The edging worked exactly as I hoped. I plan to purchase more in additional sizes. I’ve included before-and-after photos to show the results.

Buen material, ha cumplido las expectativas