Klantbeoordelingen voor VEVOR Draadsnijset Machinetappen 110-delig, Kerngatboor Draadsnijset Lagerstaal Machinedraadsnijset Inclusief 35 x Tappen, 35 x Stansen Draagtas Metrisch

The few taps and dies I have used have preformed as expected. They seem to be of good quality steel and have cut good threads. The adjustable tap wrenches feel cheap and the threads are very loose. The included screw extractor set is a nice addition but I found the largest extractor wasn't hardened as it deformed when trying to remove a burr in a nut. Using a hand file it cut right into it. I bought the set to have all the sizes organized in one case but I found each time I opened it everything was all jumbled together. 6 of the taps always fell out so I used silicone tape to give them a tighter fit in their slots. The die set was packaged in bubble wrap in a box and I cut the bubble wrap using the case as a template. This placed over the dies when the case is closed keeps them in their respected positions. Now it can be opened and everything is where it belongs. As I have only used maybe 6 of the taps and 2 of the dies I've had limited use and time will tell if the rest are of good quality.

Rapport qualité prix correcte. Très bien pour rattraper des filetages endommagés ou fraichement repeints.

Oh man. So, I guess I can preface this by saying that I do own a machine shop. I bought this for home use. Quite a few of these taps will destroy a hole more than fix it. I *have* encountered a usable tool in this kit, but it is very much a grab bag of good and bad... Realistically, if a person was planning ahead, you would be better off buying one of each size bolt, slitting it off center with a dremel, and putting them in a box. That would be more reliable and do a more consistent, better job... Unfortunately, if you are buying quality taps and dies, this price would only buy two-ish smaller, or one of the larger pieces... but, it IS incredibly frustrating when you need to tap a 6mm hole, you have three "new" taps, and none of them will do the job...

Prisvärd pra produkt

To be honest, I wasn't that impressed with the quality of the steel used. It seems very soft and the first few turns of the tap, almost rounds off the tool.

de la grosse merde casse comme du verre c'est le taraud qui s'usine même dans de l'alu tourne a gauche aussi solide qu'une motte de beure

Filet et taraud ne corresponde pas au diamètre indiqué tout est faux coffret inutilisable dommage

Taps are kind of useable none of the dies are even close

Produit acheté récemment, qualité très moyenne! Ne correspond pas à mon attente. On n'en pour son argent pas plus.

Very weak, not worth.