Klantbeoordelingen voor VEVOR diepwaterdompelpomp, 1500 W, 230 V, 50 Hz, 9,8 m³/u, 108 m opvoerhoogte, met 19,4 m kabel en externe schakelkast, roestvrijstalen waterpomp voor industrieel, irrigatie- en huishoudelijk gebruik, IP68 waterdicht.

Tuvimos un problema y nos lo solucionaron rápidamente.

This thing is exactly what we needed to get everything back up and running. It works perfectly.

Easy to set up and works like a champ. Now running long enough to say this pump is very strong, very quiet, and works as well as the one I replaced at 1/3 the cost.

Price could be a little better, but we use it to pump river water uphill. Pumps about 500 feet horizontally, with a head (lift) of around 80 feet. Pressure tank holds it steady at around 80 psi when not in use. When in use, setup triggers pump on at around 65 psi, and off at about 80. When using it to run irrigation (about 15 sprinkler heads, around 60 gpm), the pump moves so much water, it will actually cycle the system, instead of constantly running, which is pretty sweet when you consider its max flow is 37 gpm. Read description carefully, as it is a 220v pump, meaning you'll need 2 legs of your single-phase system. At full load, it pulls just under 10 amps (5 amps per leg), meaning you could get away using 14 awg copper (stranded if running through conduit with lots of turns, solid or stranded if using UF wire), but because we were running such a long distance, we opted for 12 awg. Read on if you want to do the install yourself To do it yourself (if you feel electrically inclined), you'll need at least 3 runs of wire, 4 if you want a neutral in the box (not required for this). I usually add a neutral, just in case I ever want to convert it in the future to an outlet or something (using either only 1 of the legs, or using both on separate legs, with common neutral and double pole breaker on the other end). Choose two of the following colors to use as your hot legs: red, blue, black (if adding addt'l runs, use yellow, orange, purple). Next, if running a neutral, you'll need a white wire (for simplicity, we'll skip the banding option), then you'll certainly need a ground, which must be green. Assemble your conduit (you can get away with 1/2 inch (sch. 40), but if it's a long run, I recommend 3/4 inch (sch. 40) (not for underground use, if going underground, use sch. 80 and 3/4 inch pipe). If using UF wire, simply bury it in the trench following depth guidelines. Before filling in all the way, add a line/run of metallic "buried electric line" tape about 8 to 12 inches below the ground. Use wire lubricant when pulling, it makes a difference (trust me). Use a vacuum or similar to "suck" jetline through the pipe (use a grocery bag or similar on the other end). Next, attach mule tape to the jetline and pull that through, or if you're confident you can get it through, using mule tape attached to the bag. You'll attach your wires all bundled and taped to the mule tape, then using lube, you'll pull the wires through the conduit using the mule tape.

Vevor pumps are the right blend of dependability and affordability, I have no reservations using them for my customers. Vevor pumps have always performed flawlessly and shipping is usually super fast.

Funciona muy bien,consumo real 800w

everything looks good

Works good, been in for over a week, keeps up with demand, 25% of cost of name brands ... so it seems like a win for now ... time will tell

great product

VEVOR Deep Well Submersible Pump, 2HP/1500W 230V/60Hz, 37GPM Flow, 427 ft Head, with 33 ft Electric Cord, 4-inch Stainless Steel Water Pumps. I bought this pump and I recommend it 100%. Many times cheap things turn out to be expensive. I paid $159 plus taxes for this. I installed it myself quickly and easily. This pump doesn't need a control box, which was a good thing for me,I'm not an expert. It was my first installation, and I did it myself. Vevor says that its life is 7 to 10 years, time will tell, today I have a powerful pump working at 340 feet deep with good pressure, I hope this comment is useful to new buyers.