Klantbeoordelingen voor VEVOR brandstofkan, 20 liter, benzinekan met schenktuit en comfortabele handgreep, maximale doorstroomsnelheid 6 l/min, metalen benzinetank voor de meeste auto's, motoren, ATV's en UTV's, rood, 2 stuks

Dude there where metal shavings in my tank!? What the hell? What if i used this on somthing without a strainer? Cant upload a puc because you guys reqire me to convert the image and make very tiny 🤦‍♂️

It looks like the real Jerry can, but it is thin metal which can't withstand the pressure of expansion with a 30 degree temperature change. I filled it in the morning at 68 degrees and it got up to 96 degrees for a high. the cans deformed to the extent that they do not sit straight, and the sides are bulged out. I also had two 23 year old Jerry cans that I got in Germany and they had no problem handling the pressure. Also the paint runs if you spill a little fuel down the side. The cap locking system is cheap plastic and flies off with in a few uses.

I had ordered the fuel cans with the flexible steel spout. They sent me the updated plastic push to pour spouts. Not what I ordered or wanted. I contacted them and they apologized of course and said they'd make it right. They refunded me enough cash to buy good replacement spouts. Nice to see a company actually stand up for their products. I'm totally satisfied with this.

I bought 4 red and 1 yellow of the Vevor Upgraded Oil-Tight Metal Fuel Cans. There is a little piece of plastic which has a spring behind it (I found out) that keeps tenson on the spout as you tighten it down. Upon the very 1st fill-up at the gas station "2" of the red cans snapped the little plastic piece off and the spring shot out along with the plastic tensioner. I found the spring on the ground for 1 of them, but not the other. I like they are metal cans, but should be a handle on the back side to help hold it as you are filling your mower, etc.

Ordered clamp on metal nozzle gas cans. Got plastic screw on cheap nozzles. Scam

Was not what I ordered. Was not what was t displayed on photo. They were supposed to be the metal walking caps with the metal flex hose. They were not.

Hard to pour no flexible pour spout

I purchased two red Jerry cans and to be sure I got them, I also purchased "Shipping Insurance". The VEVOR driver decided to steal my Jerry Cans at the Ft Myers Post Office. I called Vevor and said "I have Shipping Insurance". "Send me the replacement Jerry Cans right away". Instead they stabbed me in the back and refunded my money and blew me off. Buying Shipping Insurance from VEVOR means absolutely nothing. It does NOT insure Shipping thefts like any other Insurance should. I Do Not Recommend doing business with these Thieves. Buyer Beware.

Worthless customer service.. ok products..hope u like it when u receive it, because u will never be able to make a. Return. Avoid at all costs

Warping Plastic Pour mechanism doesn’t work after some months. Gases with 10% Ethanol can diffuse directly through the microscopic pores of a plastic material. This can cause the plastic to bubble, warp, or fail over time, even if it does not melt instantly. Certain gases and volatile organic compounds (VOCs) can physically degrade, dissolve, or permeate plastics through a process known as chemical attack. Because plastics and many fuels share similar hydrocarbon structures, some gases compromise plastic integrity by weakening polymer bonds or causing the material to swell, distort, or dissolve entirely. How Gas Attacks Plastics Dissolution and Swelling: Ethanol acts as a strong solvent that can leach plasticizers from polymers, turning rigid plastics brittle or soft plastics. VEVOR Needs a updated metal cap to keep Plastic Pour mechanism out of the gas.