Klantbeoordelingen voor VEVOR Box Pv Combiner 17 x 23 x 11 cm Zonne Pv Combiner Box 4-snarige Zekeringkast Gemaakt van Premium ABS-materiaal met een Professionele Hoogspannings-bliksemafleider en IP65 Beschermingsniveau 15A

Looks great

Comes with everything you need. Easy to install and plug and play afterwards.

Excellent quality.

I put it together installed, it works great\nAnd I like that the door locked that's definitely a plus

perfetto e funzionante nulla da obbiettare

Un produs de cea mai buna calitate,recomand pentru toți care vor siguranță.si la un preț extraordinar. Mulțumesc vevor

Works very well recommend it for all solar applications quality products and a great price. Easy connection and simple design

I must admit, I was hesitant to buy this combiner box due to an unpleasant experience with another purchase. But I gave vevor another chance and bought again. I was pleasantly surprised to find the combiner box exactly fitted my needs, was of reasonably good quality and easy to install. A suggested improvement would be a volt/current/watts meter inside the box. I recommend this product. Thank you

Bruger den på min båd, har 9x400w 3x3 ikke noget man skal spørge med, så blev nød til at gøre det rigtigt (ingen genveje ). Føler mig helt tryg ved at bruge den, også selvom jeg bruger sikringerne som on/off kontakt hvis jeg kun skal bruge strøm fra 6 paneler

Nice combiner box. Sadly, no PV shut-off included and fuses rather than breakers, but it is quality. Note that the 63 Amp main breaker may be too high if not using all four PV inputs and very heavy wire to run from the combiner box and may need replacing to be safe. We could only run 10 AWG wire from the combiner box and use two of the 4 input lines (~2400W 22 amps at 130+Voc with 3 x195W panels in series x 2 in each of the two input), so the 63 amp main break is illegal and pretty useless at protecting 10 AWG wire and needs replacing. At 11amps from each parallel section of the array the 15amp fuses were ok. We also put it in a stainless box as the squirrels here are ferocious on wire and plastic. Besides, the input wire needs protection (by code) and those MC4 input connectors also do not meet code and need strain relief. I was probably better off building it from scratch with a din rail, DC breakers, and my stainless boxes from the scrap yard. But, this one is convenient, if modified as needed.