Klantbeoordelingen voor VEVOR ballastbak, 3-punts tractorballast categorie 1 met een laadvermogen van 363 kg, met standaard 2-inch trekhaak, stalen constructie, 0,14 m³ volume, laderbevestiging met schuifdeur, zwart

Packaging is very thin with just cardboard walls and not properly protected, so box arrived slightly bent at some corners. Paint is peeling where bend occurred. Still usable, so I didn't bother with complaining/replacement. But you get what you pay for, quality not matched with famous tractors vendors.

Was advertised as category 1 but lift pins are really category 0 with some bushings. This will make it impossible for me to make this work with my category 3 quick hitch. I wish the lift pins were actually category 1, or at least they could be longer.

The bottom pins for this do not fit a Cat 1 3pt hitch as advertised. The box rattles around in 3 pt hitch holes. The pins are 18 mm diameter when 7/8” (or 22..225mm) is needed and I have not yet found a bushing that will convert the pin to 7/8” that I’m happy with.

Where do I start – Pins are NOT CAT 1 size as mentioned in other reviews. But on top of that....The Overall build quality and Steel is very light for the intended purpose. It’s a a weight box so it should hold weight, right? I have it filled with FIVE 55lb sand bags and it distorted the box itself and one lower 3pt pin has bent. The Hitch receiver is very light duty and too large to hold a standard 2” square receiver. This product is a perfect example off shore production without quality control...the size of the weight box and implement holders are great, as is the price point, but it is substandard. The implement holders also need drain holes in the bottom to drain rain water. I took it to a welding shop to have it beefed up and it cost $100, now it works well. I still have to find and upsize the 3-point hitch pins to 3/4.

Well construction could be better and this definitely will not weight 800 pounds after being loaded with anything. False advertisement . But for the money it does hold some weight and 2 handled tools

I bought it because of the price and features. I loaded it with 600 lbs of scrap metal and lead. It works as advertised. On the first use I damaged it when I drove the tractor forward after forgetting to raise it. It bent the legs on the bottom of the box. Bottom line the steel is just not thick enough to withstand hard use. I pounded it out. I will continue to use it while I look for a used heavy steel box.

Half the size it shows it's a photo shopped picture online

came with wrong sized pins that had to be swapped out via TSC.

tl;dr - Product not as described. Includes Cat 0 lift pins, not Cat 1. Geometry of 3-point connections is incompatible with Quick Hitch unless you have the means to permanently modify the parts. Top link pin not compatible with commonly available Cat 1-2 and Cat 2-3 bushings. I was excited to order this after what seemed like a fair number of positive reviews and some YouTube info. My goal was to fill this with scrap metal and concrete to have a more compact ballast box. I have a quick hitch with adjustable top hook. The box itself arrived safely and seemed reasonably sturdy. My satisfaction started to wane when I realized the lift arm pins included are category 0, not category 1 as advertised. Sure, there are bushings included, but Cat 0 pins are narrower and shorter than Cat 1 which makes installing QH bushings impossible without modification. After a bunch of back and forth with support, and promises to send adapters (with no indication that they understood what I was explaining), I took matters into my own hands. I split a piece of 3/4 tube stock, doubled it up, and welded that onto the pins. I then took that and fit it into the QH bushings and welded those together. Lift arm pins fixed. Next I got a set of Cat 2 and Cat 3 bushings for the top link only to find that they won’t go over the included top link pin. No problem - I have spares. With bushings installed, the hook on my QH does not properly fit the box. Either the lift pins don't sit in the hooks on the QH or the top link pin doesn't sit in the QH hook. To get all three to make contact with the QH, I had to remove all the top link bushings. My QH top link hook, even though it's adjustable, does not mate with this item the way other implements do. While I was able to make this work, it was a pain in the neck. If you have a quick hitch, DO NOT expect this to work without permanently modifying it. Also beware that the 3-point geometry is out of whack. If you’re using a standard top link and lift arms, you’ll be fine.

It has been over a month...still have not received this item.