Klantbeoordelingen voor VEVOR Badge Maker Machine 58 mm, Badge Punch Press 500 stuks. Metalen Doppen, DIY Badge Press Machine Badge Button Maker, 250 stuks. Plastic Voeten + 250 Ijzeren Voeten Badge Maker

J'ai fait plus de 100 boutons avec ça. Cela fonctionne très bien, facilement et je n'ai jamais eu un bouton en panne.

Everything is fine except that transparent parts are to short at least 0.5 to 1 mm that causes defective badges. I made my proper ones corresponding to the exact diameter of the mould . In my case photo and transparent are both 54.5mm so there is no mouvement possible and I get perfect badge. I recommand this set device is well made and strong for making badges. I must congraculate also the team as the parcel arrived fast witin 7 to 10 days with missing zipcode in my postal address. Great product

Buttonmaschine 44mm Badgemaker Buttonpresse Mit 1000 Buttonrohlinge Button Press

This is the third machine of this type (red, cast iron, sliding track) that I've purchased from Vevor. On delivery, it was not able to properly crimp the top and bottom sections of the button together. The company's tech help is very good, and after submitting a video of the problem they responded within 24 hours saying I needed a new accessory part that they would ship immediately. I have found these red models to be more glitchy than the orange one that I just ordered. If you can buy that type of machine with the size buttons you need, I'd recommend spending the additional money. These work fine, but I never know for sure if the button I'm making will come out right. Most of the time they do, but as I said, it can be glitchy.

Great buttonmaker but the screw inside comes loose about every 50 buttons and so you have to keep tightening it. We made an initial 700 buttons, and we did have some of the plastic backs come off completely, the metal backs were more reliable.

Masina este de calitate,relativ ușor de folosit deși este nevoie de forță să o folosești timp îndelungat.Partea din plastic are uneori un mic defect care strică insignele.Am fost nevoită sa verific fiecare bucata si sa folosesc o pilă pentru a netezi zona.O alta problemă e că nu găsesc consumabile de 44mm separat .

I was really excited to try this button-making machine, but the setup was disappointing. The instructions were blurry, confusing, and not helpful at all—I had to search YouTube just to figure out how to assemble it. The handle installed easily, but it arrived covered in rust and a sticky residue. Both molds also had rust on them and looked as if they had already been used for years. On a positive note, the buttons turned out great once everything was finally put together. However, for the price and for something advertised as new, I expected it to arrive in pristine condition

Bonjour, Nous avons commandé une machine à pins 44 mm le 03/09/2022. Depuis le début, nous avons des réalisations de pins avec des défauts. Nous nous sommes aperçu que le trou a l’arrière de la pièce nommée R n’est pas centrée. Ce qui fait bouger la patte verticale fixée à l’aide d’une vis. Pouvez-vous me dire si vous pouvez nous renvoyer une nouvelle pièce R avec un trou bien centré ? Cordialement Nathalie Relmont 00 33 681 04 89 95

Plastic bases crack, no rim plate for button.

Produit conforme et bien.