Klantbeoordelingen voor VEVOR Pro MIG-lasser, 200 Amp Pluse MIG-lasser, 5-in-1 Synergy-lasser MIG Pluse, gasloos MIG, gas MIG, MMA en Lift TIG, met IGBT-invertertechnologie en LCD-scherm

Scant information on the manual vevor mig 250. It should have specs on stuff that not included like the tig torch standard connectors etc . I should not have to spend time asking vevor for what torch vevor has to put on this thing that available.. They should also have already indicated vevor tig torch available on the sell page. As well as spool gun if available for this model. If they do not want to spend money on printing the should hire someone to do a video on this model. For a newbee...need more starting instruction on best practices....set up voltages amps for thickness etc....speed ....other than that ..not bad .

This welding machine comes with everything you need to get started. However, the included wire brush and welding mask are not very effective, so it's a good idea to purchase better ones. It has a knurled wire feed roller for 0.8mm and 1.0mm flux core welding wire. The machine is set up with a 0.8mm contact tip, and it also includes extra tip in 0.8mm and 1.0mm size. The included 0.8mm flux core wire worked well in my use. When using the lowest power setting, wire feeding is inconsistent, but increasing the power by 5 amps usually solves this issue. Welder automatically switches to a higher wire feed speed when it doesn't detect any welding, making it easier to feed in new wire. The manual is poorly written and mentions settings that this particular welder doesn't have, e.g. what the MIG/MAG setting actually does. The MIG/MAG selection seems to be for choosing wire diameter/power; MIG is for 1.0mm wire @ 50-130A, and MAG is for 0.8mm wire @ 30-130A. Other annoyances are that the cables from the welding torch plug get in the way of other connectors when plugged in. Rotating the end of the plug by 180 degrees would solve this. Also, the ground cable is quite short at just 0.5 meters. Overall, for the price it is a good welder, and after figuring out the settings, it worked without trouble for the three days I used it for. I only used flux core wire, but I don't see why it wouldn't work as well with solid wire + gas.

Great price and does easily small fix . Good one for amateur workshops. Easy setup and if you’re learning this is great for starting to learn how to do welding

Works good loading wire an issue like most small mig welders , wire got stuck behind spool a couple times. So far so good nice little welder.

Laissé a côté de la voiture heureusement n'a pas plu retrouvé 2jours après merci ups

kaasukupu suli heti alussa ja olisin vailla uutta

The wire holder was not possible to tighten, the wire wheel was loose. Additionally I had to use some washer under the tightening spring. The welding is ok.

Works well, short some of the items, no spare tips, no spanner

Altogether a decent unit. This is my first welding unit and actually the first time I have welded before. I struggled to get the wire to run and then realized that it was missing the "woodruff key" a very small semi-circular metal piece that locked the knurled groove roller. Without that it kind of worked; it drove the wire forward but not that much. That key is so small, you really have to pay attention to it. It is 3mm x 10mm, possibly DIN 6888. The manual does not mention it and the package does not include a replacement. For a high end model main stream model I would demand a keying mechanism that wasn't so easily lost. This could be devastating in the field. Other than that it operates very well, do not have any complaints so far.

Dommage pas de notice en français je n’ai pas pu l’utiliser