Klantbeoordelingen voor VEVOR 37,77cc benzine T-paalrammer, 4-takt benzinemotor hekpaalrammer met 2 paalrammerkoppen (55/70 mm), draagbare 1000W paalrammer voor boerderijen, ranchhekken en wegverbeteringen

works great

WE PURCHASED THIS POST DRIVER TO DRIVE SOME 5 FT SUPPORT POSTS FOR SOME OF OUR GAS METERS. THE POST ALREADY HAD A BRACKET WELDED TO THE TOP OF THE POST. THE BRACKET WAS 1" BELOW THE TOP OF THE POST. WE WERE ABLE TO CUT THE ALUMINUM SCREW ON ADAPTER OF THE DRIVER TO FIT THE POST SO THAT THE DRIVER WOULD MAKE CONTACT WITH THE POST . WE HAVE INSTALLED 36 OF THE POSTS & DROVE THEM 4' INTO CLAY WITH OUT ANY ISSUES . WE WOULD RECOMMEND THIS DRIVER. ALWAYS MAKE SURE TO CALL IN A LOCATE REQUEST BEFORE ANY DIGGING AS WE DID. WE HAVE ALSO DROVE SOME REGULAR T-POSTS WITH IT. AS PER THE INSTRUCTIONS: IF THERE ARE ANY LARGE ROOTS OR DEBRIS IN THE GROUND IT MAY HAVE ISSUES DRIVING THE POST. WE WOULD PURCHASE THIS UNIT AGAIN IF NEEDED. USE 90 WEIGHT GREASE IN THE GEAR BOX , 10W-40 OIL IN THE MOTOR PER VEVOR . THIS IS NOT IN THE INSTRUCTIONS, IT WOULD BE NICE IF THEY WOULD ADD IT .

The JH-95 four stroke driver is awesome! After unpacking it, added oil and gas and within three pulls on the starter rope it was running smooth. It is rather heavy, but I worked off the tailgate of my truck and drove in 7ft T-posts in an average of 20 seconds each! I couldn't believe how good it works. I would highly recommend it.

This is a great unit! It can be heavy and if the post are taller you might want to think of something to stand on to keep you above the post, easier to handle It took the post through some areas with rock in it that if doing by hand you would have not gotten the job done

We bought this to run new fencing. We have never had one before and always used the old fashioned one, manual. This did really well for us. On of course hard rocky ground that is similar to road bed, it was extremely tough but overall very happy with it. 95% of the fencing went really quick with this machine.

Ha cumplido sobradamente mis espectativas. Aunque sólo llevo unas 30 horas de trabajo. Avisar a otros usuarios, que despues de 2-3 horas de trabajo, reapretar los tornillos principales, ya que con las vibraciones se aflojan. Y rellenar con grasa el grupo.

This post pile driver is fantastic. Drove in 15 1 3/4” line posts in about 1 hour. Time delay was moving the tractor to set the next post. 2 posts had to be repositioned because of tree roots ( moved over 6”). And in it went One screw came undone but after a brief adjustment all is well. Would definitely recommend this product. Has good weight and pounding power

This thing is AWESOME !!! Had shoulder surgery in December, bought because I couldn’t use regular hand driver. Worth every dollar

Works well. better for 6 foot or shorter posts.

The t post drive makes doing 100 t post in a day a breeze even on hard dry dirt! Take about 30 sec to set each t post