Klantbeoordelingen voor VEVOR 15U open frame serverrack, 15''-40'' verstelbare diepte, vrijstaand of aan de muur te monteren netwerkserverrack, 4-post AV-rack met wielen, biedt plaats aan al uw netwerk-IT

Einfacher Aufbau. Die Qualität ist annehmbar, jedoch war eins der Bohrungen versetzt, weswegen ich selbst ein Loch nachbohren musste.

Was straightforward to assemble, just make sure you have appropriate tools, power tools preferred. Quality is good for the price, not the best but you get what you pay for. Holds all my equipment pretty well, except there is a little flex with my ups. My ups is a three battery 1500 ups so its a little heavier than most. But I put it on the very bottom so its not noticeable. Overall I would buy this again and if its all you need for your homelab or server it works really well. I would recommend it to anyone that only needs a 9u rack.

The rack went together fine. The only issue is the shelves supplied are attached only on the front of the rack. Anything heavy causes the larger shelf to deform. It was intended to use as a 48V 100ah battery rack and is big enough but the shelf is unsupported at the back so it will have to be modified. The second shelf is very weak and of no use . Someone mentioned that possibly you could the unit taller instead of longer but that’s not really possible unless you do not plan on using the caster’s. Although rated for 500 lbs on the wheels the one shelf cannot hold 100lbs so unless you’re putting something on the top of the unit that rating is meaningless.

Rack arrived quite fast and packaging was in good condition. Only problem was that assembly instructions were missing. Anyway, rack is quite easy to assemble, so instructions are not necessary. Also those can be downloaded from product page. About rack itself. Paint job is not best. There is scratched and other flaws in paint. Also paint is quite thin, so it scratches quite easily. Also, top cover does not cover whole rack when depth is increased. Top panel cover whole top only when rack is not expanded at all. Most problematic is that rack is little flimsy. Product page says that you can load up to 500lbs (226kg) of stuff to the rack.I have loaded some 120 kilograms of equipment to the rack, and wheel mountings are starting to bend. Also when moving rack around, it feels like it is going to collapse. I do not have needs to move it around. It might be that i remove wheels and keep it stationary. Conclusion is that rack is quite nice for it's price.

Buenas tardes, Necesito factura con nuestros datos fiscales de este pedido: CABLEALIA INFRAESTRUCTURAS, S.L. CIF.: B98773989 Dirección: Avda. Cataluña, 9 Entlo 46020 VALENCIA VALENCIA Enviar a administracion@cablealia.com Gracias

Hay que hacer bastante fuerza para que los tornillos hagan las roscas, por lo demas queda muy robusto. Las bandejas podrian ser un poco más gruesas pero lo que es el rack si que queda muy robusto

Look at the metric sizes as the rack cannot get as shallow as 15", it is a little over 23". Good, solid, small server rack, but does not fit in the location I intended to put it in.

Super rack fiable et assez rigide pour mon imprimante 3d. Les trous des vis sont malheureusement trop petit et doivent être agrandis . A part ça tout est bon.

The VEVOR 12U Open Frame Server Rack, is a nice equipment rack, and seemingly serves its purpose. Putting the rack together, on the other hand, may also seem a bit of a challenge to some who are not so mechanically inclined. The directions are not all that informative - thankfully there are a few illustrations which give guidance to complete the assembly. The bulk package of screws which are necessary to construct the rack, are self-tapping, and are extremely difficult to turn with a screwdriver by hand - but once seated, they secure the pieces in place. For the money - and based on your individual needs or use for such equipment racks - this, VEVOR 12U Open Frame Server Rack, is priced to suit most needs of the user - perhaps more so from a studio (in my opinion) setting where the rack would be "stationed," as opposed to be expected to survive the rigors from being moved from state to stage, while on the road.

Everything works great. Went together easy. Now sitting in the server room with 3 Supermicro 36 bay storage servers running on it. The only problem is with the top plate. It only fits with one depth. If you extend it at all, the top won’t fit on it and you will have to make one for it. I actually cut and stained a piece of 1/4” plywood for it.