Klantbeoordelingen voor VEVOR Smid Aambeeld, 60KG Hoorn Aambeeld, 665 mm Lengte Aambeeld Gereedschap, Draagbaar Gietijzer Gesmeed Staal Smid Forge Aambeeld Tool, Gewicht Stalen Aambeeld Smid met Rond en Vierkant Gat, Blauw

Das Produkt entspricht den Anforderungen, da wir eine Firma sind benötigen wir eine Rechnung, haben bereits 2x per E-Mail versucht eine Rechnung anzufordern, bekamen bis dato immer nur die Rückmeldung, dass das Postfach voll ist. Daher werde ich mir eine weitere Bestellung gut überlegen.

It's a nice anvil for beginner blacksmiths. Sturdy enough to sustain continuous 1.5kg hammer blows without showing signs of wear. The paint gradually comes off with usage, but that's just a cosmetic aspect (and, if I dah to be honest, the bright blue paint is plain ugly). Rebound is good enough for 300g-800g hammers. However, when it comes to heavier blows like 1.5kg hammers, it doesn't help as much. The anvil is a bit noisy, especially if you hit the horns. A quick fix for the noise is to stick a strong magnet to the end of the horns to reduce high-pitch vibrations. I would highly suggest you place this anvil on a heavy base that can hold it still, since it tends to wander around when hit with a heavy hammer. Also, I'm currently working on some upgrades like welding a wider base to the anvil legs to increase both weight and stability.

I like everything about the anvil. Easy to use just wish it had a round horn.hard to make round things on it but i do make do. would recommend it to anyone who is just starting out

Very good basic anvil. I like that it’s tool steel and not cast iron. Anchor well, because it rings very loud otherwise.

Tanto los plazos de entrega como el seguimiento del envio fueron correctos. El embalaje y proceso de reparto, impecable. El producto se adapta a lo necesario. Y es correcto en su funcionamiento. Cumple las espectativas. Lo recomiendo.

Contexte : Amateur pas trop musclé Remarques : Je pensais que ce serait plus imposant, mais c'est suffisamment lourd comme ça. Contre: Emballage qui a un peu souffert, mais l'enclume est intacte (pas sûr que ce soit le cas pour les objets autour) Pour: Pas de surprise, identique à la photo. Bleu moche, mais bel état de surface sur la zone de travail. J'ai enfin réussi à plier une patte métallique assez épaisse sans rien casser, ni risquer de me faire mal. Pas de trace de frappe sur la surface après le premier essai. Ca devrait parfaitement convenir à mes petits bricolages d'amateur.

I’m pleased with this anvil, solid, good face. It was delivered very quickly. The only issue I have was that there was a bunch of Bondo on the underside and the horn had cast marks on it. I highly recommend this anvil.

Ricevuta in tempi brevi, di buona qualità, superficie un po' troppo facilmente scalfibile, ma complessivamente buona per piccoli lavori DIY

I'm not a blacksmith, I dont know what a pritchard hole is. I'm just a dude who hammers on ordnance at a BRACed munitions depot for money. I found the scavenged railroad tie plate they gave me for this purpose too soft and bouncy. The anvil surface is hard and flat, and the round horn is handy for opening up pinched 37mm's for inspection and clearing. It has been sitting exposed to cold and very damp weather for a few days and doesn't show any rust yet. The blue paint comes off onto everything that conctacts with it. The casting is rough at the holes in the feet and very sharp in places. I was hoping to lag screw the anvil to a log I was given for a pounding station, but the feet holes are unsuitable for this. I'm not sure if that's a normal anvil feature. I chiseled a pair of recesses into my log so it sits secure enough. Shipping was pretty quick. All in all, I say it beats the hell out of using a tie plate.

I have been making blades for over four years, and wanted a second anvil. I saw the attractive price and decided to try it out. The description says it's cast steel (never purchase a cast iron anvil. Iron is to soft) and it had a 52 hardness. I built a three legged base with 1/4" 2"x2" tubing for the legs and 1/2" plate steel for the base for the anvil to sit on. I filled the legs with sand, tapped the legs with a hammer to get as much sand to compact. This adds weight that you want to keep it from jumping around when using. I dropped a 1" steel ball bearing on the anvil after attaching it to the base from 2' above. The "rebound" of the bearing was 14". When striking some HOT out of the forge 1095 carbon steel with a 3# cross pein hammer, the sound of the strikes were dull and low. (that's what you want) The farther toward the rear of the anvil you strike, it doesn't have the same sound or recoil as the center of the anvil. I also question the hardness of the face. I did manage to put a small dent in the face. I will test the hardness later to see what I get. Overall, it's a great buy at the price! It doesn't come close to my 300#TFS anvil, but it also didn't cost $2,800.00. I would recommend this VEVOR anvil to anyone getting into blacksmithing/bladesmithing, or just needing something to pound on.