Klantbeoordelingen voor VEVOR Vorkverlenging Stalen heftruck 1000kg Laadvermogen CAT1/CAT2 Montage 78x61x25cm Palletwagen 20kg Hefpallet 3-punts aansluiting Geschikt voor alle transport- en expeditievoertuigen

Forks are built good for the rated weight they can handle. Easy to put onto bucket. The hold down bolt is weak and bends easily and one of the bottom nuts fell off on mine while loosing the bolt from the bucket, the lock tight used to keep it on broke loose allowing the nut to unscrew from the bolt. I drilled a hole through the nut and bolt and installed a roll pin to fix it. Works great now

Everything is good I just wish the screws to hold them in place had something where you can use a wrench to get it tight other than that great product.

Vraiment très pratique, seul inconvénient on ne voit pas pour entrer sous la palette, il faut descendre de l'engin.

Arrived on time. Very easy to install and remove. They work as described and are a great addition to my tractor

For the price, hard to complain. But if asked I would say the bolts that hold the forks to the bucket are hard to keep tight. If they get loose and you don't catch it, it could cause all kinds of problems. I would rather have bolts with hex heads, and likely will replace them later, so I can tighten easier with a wrench.

Over all I like these forks. After several times using them, there’s something I would change with the clamps. You have to use a cheater bar to get them tight and the threaded rods that’s bent over as a handle interfere with each other. The solution I’m going to implement is cut off the bend on the rod and weld a large nut to the to the top. Then a wrench or socket could be used to tighten each rod. Otherwise I’m very happy with them

Works good, but 1 fell off during operation when backing out of pallet. Othwlerwise I am happy with them.

Took a while to arrive but it travelled quite a distance, kudos !! Great implement addition for my small estate tractor. Completely adequate and adaptable for different tasks. No issues. Good buy. Thank you Vevor!

Well made - I use it on my mini stand on skid steer loader to move cut brush to my burn pile - My only complaint is the screw down locking bolt end does not swivel so it is hard to get it tight - I resolved the problem by making my own swivel foot - The price is fantastic and I would not hesitate to recommend it

Hi.Purchased 2 sets in error as the ad is misleading.It ' included is one forks. The ad should read 'forks'.Hence purchased two sets in error. No stabiliser bar included which is included in another set which was the set I should have purchased. So they when it arrived,I got 4 forks. Can you do something about the second set of fork at this stage? Thank you Thomas