Klantbeoordelingen voor VEVOR Vorkverlenging Stalen heftruck 1000kg Laadvermogen CAT1/CAT2 Montage 78x61x25cm Palletwagen 20kg Hefpallet 3-punts aansluiting Geschikt voor alle transport- en expeditievoertuigen

Lifted my load great. Cross member broke, allowing the forks to move. Screw down bolts need to be separated more, so they don't hit each other or change to a large bolt head.

I always get things shipped quickly from Vevor. The quality of these clamp on forks is extremely good, thick metal and good welds. The only thing I would recommend is to spend a bit more and get the 60”. These seem just a bit short.

Read description carefully forks do not have a 60 working length seem to be holding up ok didn't fit my bucket verry New bucket cutting edge. Is to thin for the front of the forks to clamp on tight

Does the light lifting to off load deliveries that I needed. Can't ask for more. Easy to attach and connecting arm keep forks aligned

Good to work aroud the house, but falls of easily when you try to get out of an heavy pallet. Overall satisfied

Works as described, should have got the one with the cross brace. It keeps the forks straight. Still is good.

How about these and they work really well hook right onto the bucket of my tractor and helped a lot. The only thing I would change is I probably would’ve bought the 60 inch instead of 43.inch

These forks worked great, lifted very heavy logs with no problem. But the Stabilizer Bar cracked the first day. The welds between the bar and the ends (that slide on the fork) werent strong enough. I'm searching for a heavy duty bar now. But the forks are very heavy duty, impressive for the price. I do recommend using a rubber blow hammer to get the screw bolts really tight, and keep it with you b/c they do get loose and/or you will need to bang the fork straight periodically. But for occasional use, they are great

They work pretty well but can slip if they are not really well attached. Need to use the cross bar or they can easily fold in or out. Limited by the lifting ability of your tractor and bucket.

I've used them to pickup railroad ties and when I started going under the ties they turned sideways . They were sliding on the yellow plates. You have to really tighten them to your tractor bucket to keep them in place. The crossbar bolt also broke on the forst usage. Thank you for suppling a spare. Overall strength is good. They are worth the money just tighten them extremely tight so they don't shift.