VEVOR CO2-lasergraveermachine 45W, 300x200 mm, tafelmodel CO2-lasergraveermachine met roterende as, luchtassistentie, compatibel met LightBurn, CorelDRAW en GRBL, voor hout, acryl en glas
45W Bureaublad
Vragen en antwoorden
2 Vragen
“My glass is 233 mm long and has a maximum diameter of 86 mm. Can this exact size be engraved using the included rotary attachment?”
If your material is cylindrical, it can be accommodated.
When using the rotating shaft with this machine, we recommend removing the drawer from the bottom of the platform, placing the rotating shaft on the table, and raising the machine.
This allows you to place thicker cylinders on the rotating shaft; it should be able to accommodate a maximum diameter of 8–9 cm.
If the machine is not raised, only very small diameters can be accommodated.
Doorvevor
What is the max size of het cup if you put it in the rotary under the laser
When using the rotary attachment, we suggest removing the drawer at the bottom of the platform and placing the rotary on the table to raise the machine. In this setup, it can support cylinders with a maximum diameter of 8‑9 cm. Without raising the machine, only items of very small diameter can be used.
Doorvevor
