CW-5200 Pro Industrial Chiller
Rapid Cooling & Intelligent Temperature Adjustment & Multiple Security
CW-5200 Pro Series is a professional industrial cooling machine referring to international, advanced thermolysis cooling system design, suitable for small water-cooled cooling devices requested machinery. It has a 6 L cooling tank capacity and built-in cooling fans for adequate ventilation. It is designed for cooling the one CO2 glass laser tube under 130W/150W of the laser engraving and cutting machine.
- Economical and Practical
- Strong Heat Dissipation Capacity
- Accurate Thermostat
- Various Alarm Functions
6 L Cooling Tank Capacity
The water cooler chiller has a 1.6 gallon (6 L) water capacity to ensure powerful cooling performance. It is also equipped with a water level gauge. You can refill with water according to the scale.
Rapid Cooling
Professional forced air-cooled radiators inside quickly take away the heat. And the high heat dissipation capacity decides that the chiller machine is not easily blocked. What’s more, we use the standard R-407C as refrigerant to make sure the laser cutting and engraving machines work smoothly during use.
Precise Thermostat
Under normal circumstances, you don’t need to adjust the parameters. The new intelligent temperature controller will automatically change the parameters according to the room temperature to meet different cooling requirements.
Multiple Alarm Functions
This laser engraver water chiller has various protection and early warning functions: water flow alarm protection, high/low-temperature alarm, compressor delay protection, and compressor over-current protection.
User-Friendly Handle
The ergonomic design of the plastic handles makes them comfortable to hold and easy to move. Also, they are durable and reliable, so they will effectively save your time and improve your working efficiency.
Wide Application
CW-5200 Pro Series is a professional cooling machine with a portable design. It is easy to install and operate, designed for cooling the one CO2 glass laser tube under 130W/150W of the laser engraving and cutting machine.
- 1 x Water Chiller Machine
- 1 x Power Cable
- 2 x Sealing Washers
- 1 x Spare Fuse
- 1 x User Manual
- 1 x Alarm Signal Output Plug
- Model: CW-5200 Pro
- Voltage: 220V
- Frequency: 50/60 Hz
- Current: 0.3-4.1A
- Tank Capacity: 6 L
- Compressor Power: 1.4kW
- Nominal Cooling Capacity: 1700W
- Refrigerant: R-407C
- Refrigerant Charge: 350-370g
- Precision: ±32.54℉ / 0.3℃
- Pump Power: 48W
- Maximum Flow: 16 L/min
- Maximum Pumping Lift: 52.5' / 16 m
- Inlet and Outlet: External Φ0.4 in / 10 mm Nylon Connector
- Net Weight: 52.9 lbs / 24 kg
- Product Size: 22.8 x 11 x 18.5 in / 58 x 28 x 47 cm
- Packing Dimensions: 26.77 x 16.14 x 22.44 in / 68 x 41 x 57 cm
